Applied in DN15-DN200 ball valve assembly welding, while completing the ball valve at both ends of the main assembly welding path, the equipment is double-gun automatic welding.
Equipment function characteristics
1, with a single axis positioner, the workpiece horizontal clamping, tail support, to ensure that the workpiece automatic centering; Select 300 machine plus chuck, the clamping force is large, to ensure that the workpiece can be rotated and flipped in the process of not loose; The workpiece turnover Angle can be adjusted to fully meet the process requirements;
2, the tail cylinder control compression force, clamping force can be adjusted, can be set display, pre-load force unqualified alarm system equipment, pre-load force can be set electrical control closed-loop system, can be preset pressure, can meet the pressure setting of different workpieces, through the electromagnetic control valve, real-time feedback pressure value;
3. After the ball valve is installed, the tail seat mechanism is jacked tight until the welding is finished;
4. When the ball valve is on, the lifting support frame can support the ball valve end tube, which is easy to press and avoid damage;
5, lifting support lifting using electric form, can automatically lift height;
6, the horizontal position of the welding gun electric remote rod adjustment, welding gun Angle can be manually adjusted;
7. During the welding process, the welding gun can be fine-tuned, current and voltage adjusted. When automatic, the current is welded according to the predetermined value;
8, the control system with welding parameter storage, call function (welding current, voltage, welding speed), can record multiple welding parameters;
9, with welding gas pressure detection system, when the air pressure is lower than the set value, the system sends an alarm, prompting to replace the cylinder;
10, two welding machines set the switch separately, can operate independently;
11, there is a data connection interface, can do digital upgrade;
12, after the welding is completed, the welding door is opened manually;
13, the equipment design integral base, and equipped with shock-absorbing footing, to facilitate the overall movement of the equipment; A dust pallet is arranged under the base for easy cleaning; A dust removal interface is reserved above the device shell.
14. Blue RAL 5015;
15, workflow: pack card artifacts and lock - according to the close button - closed automatic welding gun in place - start welding - finish - welding torch to zero - automatic door - artificial discharge;
16, machine type change process: clamp the workpiece, manually adjust the welding gun position, call welding parameters;
17, with scanning code gun, equipped with scanning code function.
About us
FAQ
1.What is your nature of your company:dealer or factory ?
We are manufacturer with a big factory ,warmly welcome to visit our factory and contact us.
2. Which export port you use?
Any China ports. Commonly, we will use Dalian port. But it can be appointed as you like.
3.How about the warranty?
Warranty period of one year (since the completion of mechanical debugging at the buyer's factory). During the warranty period, if there is a problem with the equipment, we are responsible for repairing and replacing parts free of charge, but we do not provide coverage for perishable parts, lost parts, consumable parts, or human damaged parts.
4.What shall we do if don't know how to operate your machine?
We have detail installing and operating instructions attached, also comes with video.Our after sale service hot line will be available for 24H everyday.
5.What if we have any problem with the machine?
We will get back to you with solutions with maxmum of 24 hours after receiving your description of what the problem is.
Audited Supplier 
){kind=link}